CHANGELOG 32.5 KB
Newer Older
1
2
3
4
Differences Between DuMuX 2.5 and DuMuX 2.6
===================================================

* IMPROVEMENTS and ENHANCEMENTS:
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
  - For the non-isothermal porous media models, the energy equation is
    implemented in a more generic way for all models in
    dumux/implicit/nonisothermal. The existing TypeTag names like TwoPNI stay
    the same. If a new non-isothermal model should be used, it is important
    to NOT include anything from the old model-specific implementation like
    from dumux/implicit/2pni, but to include from the model folder without the
    "ni". See test/implicit/2pni for details. In principle, any isothermal
    porous media model can be enhanced with the energy equation. Ideally, only
    the corresponding property files have to be augmented. See
    dumux/implicit/2p/2ppropert*.hh for details. The 1p2c model already has
    been enhanced, the remaining models will follow in 2.7.

  - The AMG backend is based directly on dune-istl now. No PDELab is required
    anymore. The tests so far exhibit an improved robustness. Thanks to Markus
    Blatt for the work.

  - The multidomain models can now be used with the 2.3 release versions of the
    DUNE core modules and dune-multidomaingrid, and the 2.0 release versions
    of dune-pdelab and dune-multidomain. See test/multidomain/README for
    details.

  - In the fully implicit mpnc model, a further specialization allows now to
    describe two-phase flow with two energy equations.

  - The free flow models now include the component enthalpy fluxes transported
    by diffusion processes (h^k D grad x), which was not considered before.

  - UMFPack is a new direct linear solver and can be use as a drop-in
    replacement for SuperLU. Some users claim a speed-up up to a factor of
    seven. We know cases where it was 10% slower, so please measure for your
    problems.
36
37

* IMMEDIATE INTERFACE CHANGES not allowing/requiring a deprecation period:
38
39
40
41
42
43
44
45
46
  - The 3p3cni model now also uses an effective thermal conductivity model
    (ETCM). The ETCM is easily exchangeable. The default one is
    ThermalConductivitySomerton, which is implemented in
    dumux/material/fluidmatrixinteractions/3p. The ETCM requires that 3p3cni
    spatial parameters provide a function thermalConductivitySolid instead of
    matrixHeatFlux. See test/implicit/3p3cni/columnxylolspatialparams.hh for
    details. Moreover, the employed fluid system has to actually implement the
    function thermalConductivity. See
    dumux/material/fluidsystems/h2oairxylenefluidsystem.hh for details.
47

48
49
50
51
52
53
54
55
56
  - The non-isothermal flux variables call the effective thermal conductivity
    models (ETCM) in a different way. If you used a self-written ETCM and want
    to use a new non-isothermal model, the ETCM has to be adapted. See
    material/fluidmatrixinteractions/2p/thermalconductivitysomerton.hh for
    details.

  - Fully implicit mpnc model: in order to account for the possibility of using
    two energy equations, the boolean property EnableKineticEnergy has been
    changed to the integer property NumEnergyEquations.
57

58
59
60
* Deprecated way of setting command line parameters, to be removed after 2.6:
  - To set paramaters from the command line, the notation --parameterFile=NAME
    is deprecated. Use from now on -ParameterFile NAME.
61

62
63
64
* Deprecated CLASSES/FILES, to be removed after 2.6:
  - The old non-isothermal porous media models are deprecated. Technically,
    including a ..niproperties.hh file triggers a deprecation warning.
65

66
67
68
69
70
  - FVPressure2P2CAdaptive, use dimension-specific implementations
    FV2dPressure2P2CAdaptive and FV3dPressure2P2CAdaptive instead.

  - FVTransport2P2CAdaptive, use dimension-specific implementations
    FV2dTransport2P2CAdaptive and FV3dTransport2P2CAdaptive instead.
71
72

* Deprecated MEMBER FUNCTIONS, to be removed after 2.6:
73
74
75
76
77
  - In the Stokes flux variables, the method eddyViscosity() is deprecated, use
    dynamicEddyViscosity() instead.

  - In the Stokes non-isothermal flux variables, the method eddyConductivity()
    is deprecated, use thermalEddyConductivity() instead.
78

79
80
81
  - Already in 2.5, the following member functions of MultiDomainModel/Problem
    have been deprecated: subProblemX, subModelX, subIDX, gridViewX with X=1,2.
    They are replaced by sdProblemX, sdModelX, sdIDX, sdGridViewX.
82
83
84
85
86
87

* DELETED classes/files, property names, constants/enums, 
  member functions, which have been deprecated in DuMuX 2.5:
  Everything listed as deprecated below has been removed.


88
89
90
91
Differences Between DuMuX 2.4 and DuMuX 2.5
===================================================

* IMPROVEMENTS and ENHANCEMENTS:
92
  - The three-dimensional implementation of the MPFA L-method is made
93
    available for the decoupled compositional 2p2c models. It also allows
94
    for simulation on an adaptive grid.
95
  - Coupling of 2c2p with stokesnc and 2p2cNI with Stokesncni was
96
    added. The stokes2c and stokes2cni are now DEPRECATED and will be kicked 
97
98
99
100
101
    out by the next release. Instead generalized stokesnc and stokesncni 
    models are introduced. Unlike 2c models the transport equations in 
    the nc models are capapable of using both mass and mole fractions.
    NOTE: For coupling test examples be aware of the harsh version 
    restrictions mentioned in dumux/test/modelcoupling/README.
102

103
* IMMEDIATE INTERFACE CHANGES not allowing/requiring a deprecation period:
104
  - Dropped support for PDELab 1.0.1, PDELab 1.1 is required.
105
106

* Deprecated CLASSES/FILES, to be removed after 2.5:
107
108
  - Stokes2cModel was replaced by StokesNCModel, similar for more
    Stokes2c* classes.
109
110
111
112
113
114

* DELETED classes/files, property names, constants/enums, 
  member functions, which have been deprecated in DuMuX 2.4:
  Everything listed as deprecated below has been removed.


115
116
117
Differences Between DuMuX 2.3 and DuMuX 2.4
===================================================

118
119
120
121
122
123
124
* IMPORTANT NOTES:
  - If the current trunk version of DUNE (2.3) is used, the co2 and co2ni tests
    require that the DUNE_GRID_EXPERIMENTAL_GRID_EXTENSIONS flag is set. This
    flag is needed in order to be able to use the function boundaryId(). An
    error is thrown during compilation if the flag is not set. For reference see
    the commented part in optim.opts and debug.opts.

125
126
127
  - All two-component models (1p2c, 2p2c, 2p2cni, co2, co2ni) can now be used 
    with either mole or mass fractions. The property useMoles has to be set in 
    the problem file and the boundary conditions have to be choosen accordingly.
128
129
130
    . 1p2c, 2p2c, 2p2cni use MOLE fractions by default.
    . co2, co2ni use MASS fractions by default.
    . For completeness: 3p3c, 3p3cni and mpnc use MOLE fractions only.
131

132
* IMPROVEMENTS and ENHANCEMENTS:
133
134
135
136
137
138
139
140
141
  - Three geomechanics models have been added, thanks to the previous PhD work
    of Melanie Darcis. The models are located in dumux/geomechanics, a test for
    each model is provided in test/geomechanics:
    . elastic: linear elasticity equations that account only for the solid
               mechanics.
    . el1p2c:  poroelasticity equations for one solid and one fluid phase, where
               the fluid phase is admitted to consist of two components.
    . el2p:    poroelasticity equations for one solid phase and two immiscible
               fluid phases.
142

143
144
145
  - A three-dimensional implementation of the MPFA L-method is added and made
    available for the decoupled 2p models. It also allows for simulation on
    an adaptive grid.
146

Bernd Flemisch's avatar
Bernd Flemisch committed
147
148
149
150
151
152
153
154
155
156
  - The MPNC model now allows to drop the assumptions of local thermal and/or
    chemical equilibrium. Dropping the local chemical equilibrium assumption
    leads to mole fractions in different phases that are not determined via
    equilibrium relations. If the local thermal equilibrium assumption is
    dropped, phases (fluids and solid) are locally allowed to have different
    temperatures. See test/implicit/mpnc/test_boxmpnckinetic for an example.

  - A fully-implicit three-phase immiscible model has been added. The headers
    are contained in dumux/implicit/3p, tests are provided in test/implicit/3p.

157
158
159
160
161
162
  - The handling of Dirichlet boundary conditions for the fully-implicit cell-
    centered models has been improved. Now, the conditions are evaluated at the
    centers of the corresponding boundary faces. In general, they are
    incorporated into the local residual in a weak sense. Only for mixed
    Dirichlet/Neumann conditions and for the MPNC model, they still are
    incorporated in a strong sense.
163

164
165
166
  - The sequential models can use a sub-timestepping in the transport scheme, if
    the property "SubCFLFactor" is chosen smaller than "CFLFactor", which in
    that case specifies the CFL factor used in the pressure equation.
167
168
169
170
171
172

  - All fully-implicit porous-media models now provide the possibility to write
    the velocities to the VTK output. This can be achieved by setting the
    parameter "AddVelocity" of the group "Vtk" or the corresponding property 
    "VtkAddVelocity." See test/implicit/1p2c for an example.

173
174
175
  - The CMake build system support uses the experimental mechanisms from DUNE.
    Recent versions of Dune 2.3-svn or newer are required to use CMake.

176
177
178
179
180
181
182
183
184
185
186
  - Our naming rules have been refined and enforced for member functions and
    variables. Many inconsistencies could be removed, especially the special
    status of the capitalized "S" indicating saturation. See the deprecation
    listings below or FS#180 for details.

  - Misleading names in the fully-implicit models that still contained "b/Box"
    have been replaced by more generic ones. See the deprecation listings below
    or FS#194 for details.

  - The ...FVElementGeometry classes have been cleaned up a bit. See the 
    deprecation listings below or FS#192 for details.
187

188
189
  - Added compiler support for Clang 3.2, Clang 3.3, and GCC 4.8.

190
* Deprecated CLASSES/FILES, to be removed after 2.4:
191
  - OnePBoxModel, OnePTwoCBoxModel -> OnePModel, OnePTwoCModel
192

Bernd Flemisch's avatar
Bernd Flemisch committed
193
194
195
196
197
198
199
200
201
  - Headers containing capitalized letters are replaced by their non-capitalized
    analogs. 
    In dumux/decoupled: 1p/cellData1p.hh, 1p/fluxData1p.hh, 
    2p/cellData2padaptive.hh, 2p/fluxData2p.hh, 2p/cellData2p.hh,
    2p2c/cellData2p2c.hh, 2p2c/cellData2p2cadaptive.hh, 2p2c/fluxData2p2c.hh,
    2p2c/cellData2p2cmultiphysics.hh.
    In dumux/material/fluidmatrixinteractions/3p: parkerVanGen3p.hh,
    parkerVanGen3pparams.hh.

202
203
204
205
206
* Deprecated CONSTANTS/ENUMS, to be removed after 2.4: BEWARE: Older compilers 
  will not print any warning if a deprecated constant/enum is used.
  - saturation indices: S0Idx, SnIdx, SnOrXIdx, SOrX1Idx, SOrX2Idx, SwIdx, 
    SwOrXIdx
    -> s0Idx, snIdx, snOrXIdx, sOrX1Idx, sOrX2Idx, swIdx, swOrXIdx
207

208
209
210
211
212
213
214
215
216
217
218
219
  - two-phase formulations: pnSn, pnSw, pwSn, pwSw -> pnsn, pnsw, pwsn, pwsw

  - DecoupledTwoPCommonIndices: pressureNW, saturationNW, velocityNW 
    -> pressureNw, saturationNw, velocityNw

  - DecoupledTwoPIndices: pressEqIdx -> pressureEqIdx

  - MPNCIndices: NumPrimaryEnergyVars, NumPrimaryVars
    -> numPrimaryEnergyVars, numPrimaryVars

* Deprecated public MEMBER VARIABLES, to be removed after 2.4: BEWARE: Older
  compilers will not print any warning if a deprecated public member variable 
220
  is used.
221
222
223
224
  - ...FVElementGeometry: numEdges, numFaces, numFap, numVertices
    -> numScvf, -, numFap of each subcontrolvolume face, numScv

  - BoxFVElementGeometry: edgeCoord, faceCoord
225

226
227
228
229
* Deprecated MACROS, to be removed after 2.4: BEWARE: The compiler will not
  print any warning if a deprecated macro is used.
  - DUMUX_ALWAYS_INLINE whether the according attribute is supported

230
* Deprecated MEMBER FUNCTIONS, to be removed after 2.4:
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
  - all problems: bboxMin/Max() -> bBoxMin/Max()

  - ImplicitProblem: boxSDNeumann(), boxSDSource()
    -> solDependentNeumann(), solDependentSource()

  - ImplicitPorousMediaProblem: boxGravity(), boxTemperature() 
    -> gravityAtPos(), temperatureAtPos() (different signatures!)

  - fluid-matrix-interactions: dkrn_dSw(), dkrw_dSw(), dpc_dSw(), pC(), 
    dSw_dpC(), Sgr(), Snr(), SnToSne(), Sw(), Swr(), SwToSwe()
    -> dkrn_dsw(), dkrw_dsw(), dpc_dsw(), pc(), dsw_dpc(), sgr(), snr(), 
    snToSne(), sw(), swr(), swToSwe()

  - LinearMaterial(Params): entryPC(), maxPC(), setEntryPC(), setMaxPC() 
    -> entryPc(), maxPc(), setEntryPc(), setMaxPc()

  - RegularizedVanGenuchten(Params): pCHighSw(), pCLowSw() 
    -> pcHighSw(), pcLowSw()

  - VanGenuchtenParams, ParkerVanGen3PParams: setVgM(), setVgN(), vgM(), vgN()
    -> setVgm(), setVgn(), vgm(), vgn()

  - ParkerVanGen3P(Params): betaGN(), betaGW(), betaNW(), pCAlpha(), pCGN(), 
    pCGW(), pCNW(), setBeta..., setkrRegardsSnr(), Swrx()
    -> betaGn(), betaGw(), betaNw(), pcAlpha(), pcgn(), pcgw(), pcnw(), 
    setBeta..., setKrRegardsSnr(), swrx()

  - MPLinearMaterialParams: Sreg() -> sReg()

  - EvalCflFlux...: getCFLFluxFunction() -> getCflFluxFunction

  - FVMPFAOInteractionVolume: getNTKNu_by_dF(), getNTKNu(), getNTKrKNu_by_dF(), 
    getNTKrKNu()
    -> getNtkNu_df(), getNtkNu(), getNtkrkNu_df(), getNtkrkNu()

  - TwoPDFMVolumeVariables: dSM_dSF() -> dsm_dsf()

  - Stokes...Variables: viscosity() -> dynamicViscosity()

  - IAPWS water: ddgamma_ddpi, ddgamma_ddtau, ddgamma_dtaudpi, dgamma_dpi, 
    dgamma_dtau, dp_dpi, dpi_dp, dtau_dt 
    -> ddGamma_ddPi, ddGamma_ddTau, ddGamma_dTaudPi, dGamma_dPi, dGamma_dTau, 
    dp_dPi, dPi_dp, dTau_dt
274
275
276
277
278
279

* DELETED classes/files, property names, constants/enums, 
  member functions/variables, which have been deprecated in DuMuX 2.3:
  Everything listed as deprecated below has been removed.


280
Differences Between DuMuX 2.2 and DuMuX 2.3
Christoph Grueninger's avatar
Christoph Grueninger committed
281
282
283
===================================================

* IMPROVEMENTS and ENHANCEMENTS:
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
  - A fully implicit two-phase discrete-fracture-matrix model has been added, 
    see test/implicit/2pdfm.

  - Almost all porous media fully implicit models now can either use a
    vertex-centered (box) or a cell-centered spatial discretization. The choice
    of the spatial discretization method is controlled by deriving the problem
    type tag either from BoxModel or CCModel. This allows for a uniform problem
    description, as long as the boundaryTypesAtPos and dirichletAtPos methods
    can be used. By evaluating the compile-time property ImplicitIsBox, it is 
    easily possible to separately handle the different discretizations inside 
    am common method. See the tests in test/implicit for examples. 
    Correspondingly, the directory structure has been adapted. 
    Old:             New:
    dumux/           dumux/
      boxmodels/       implicit/
        common/          common/
        1p/              box/
        1p2c/            cellcentered/
        2p/              1p/
        ...              ...
    test/            test/
      boxmodels/       implicit/
        1p/              1p/
          test_1p          test_box1p
        ...                test_cc1p
                         ...

  - A backend for the ISTL AMG solver has been included, based on the
    corresponding DUNE-PDELab backends. It can be used for the fully 
313
314
315
    implicit and the decoupled models, see test_*1pwithamg in 
    test/implicit/1p and test_impeswithamg in test/decoupled/2p. 
    DUNE-PDELab and possibly DUNE-ISTL have to be patched, see the file 
316
    README in the patches directory. 
317

318
319
320
  - The decoupled models have been parallelized, see test_impeswithamg in 
    test/decoupled/2p. They work in parallel only if the AMGBackend is used 
    as linear solver. No dynamic loadbalancing can be done yet. 
321
322
323
324
325
326
327

  - The MPNC model can use either the most wetting or the most non-wetting phase
    pressure as primary variable. This is controlled via the property 
    "PressureFormulation."

  - The table of available parameters has been improved, see 
    http://www.dumux.org/doxygen-stable/html-2.2/a00838.php
Klaus Mosthaf's avatar
Klaus Mosthaf committed
328
329

  - Improved handling of the conductive heat fluxes in the non-isothermal implicit  
330
    two-phase models, see the problem files in test/implicit/2p(2c)ni.
Klaus Mosthaf's avatar
Klaus Mosthaf committed
331

332
  - Introduced new selection of start/stop messages.
333
334
335
336

* IMMEDIATE INTERFACE CHANGES not allowing/requiring a deprecation period:
  - The property Salinity used in the BrineCO2FluidSystem 
    has been renamed to ProblemSalinity. 
337

Klaus Mosthaf's avatar
Klaus Mosthaf committed
338
  - The matrixHeatFlux(...) and boundaryMatrixHeatFlux(...) methods in the spatial
339
340
341
342
343
344
345
346
    parameters of nonisothermal implicit twophase models have been removed.
    Instead, the computation of the effective thermal conductivity has been sourced 
    out to the fluidmatrixinteractions in a separate file 
    dumux/material/fluidmatrixinteractions/thermalconductivitysomerton.hh, which
    can be exchanged. The spatial parameters file needs a method 
    thermalConductivitySolid(...), where the thermal conductivity of the solid
    material only is specified. The rest is computed in the respective
    flux variables.
Christoph Grueninger's avatar
Christoph Grueninger committed
347
348

* Deprecated CLASSES/FILES, to be removed after 2.3:
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
  - The following headers in dumux/boxmodels/ have been deprecated and forward 
    to the corresponding headers in dumux/implicit/box: 
    boxassembler.hh, boxelementvolumevariables.hh, boxlocalresidual.hh,
    boxpropertydefaults.hh, boxelementboundarytypes.hh, boxfvelementgeometry.hh,
    boxproperties.hh, intersectiontovertexbc.hh

  - All headers in the following subdirectories of dumux/boxmodels have been 
    deprecated and forward to the headers in the corresponding subdirectories 
    of dumux/implicit:
    1p, 1p2c, 2p, 2p2c, 2p2cni, 2pdfm, 2pni, 
    3p3c, 3p3cni, co2, co2ni, mpnc, richards

  - Some box-specific classes "Box..." in dumux/boxmodels/common could be 
    completely replaced by unified "Implicit..." classes in 
    dumux/implicit/common: 
    ...DarcyFluxVariables, ...darcyfluxvariables.hh 
    ...ForchheimerFluxVariables, ...forchheimerfluxvariables.hh 
    ...LocalJacobian, ...localjacobian.hh
    ...Model, ...model.hh
    ...PorousMediaProblem, ...porousmediaproblem.hh
    ...Problem, ...problem.hh
    ...VolumeVariables, ...volumevariables.hh

  - The box-specific spatial parameter classes BoxSpatialParams... in 
    dumux/material/boxspatialparams....hh have been deprecated in favor of 
    ImplicitSpatialParams... in dumux/material/implicitspatialparams....hh.

  - The GridCreatorheaders from dumux/common have been moved to dumux/io: 
    cubegridcreator.hh, dgfgridcreator.hh, simplexgridcreator.hh

* Deprecated PROPERTY NAMES, to be removed after 2.3: BEWARE: The compiler will
  not print any warning if a deprecated property name is used.
  - CompositionFromFugacitiesSolver has been renamed to Constraintsolver.

* Deprecated public MEMBER VARIABLES, to be removed after 2.3: BEWARE: The
  compiler will not print any warning if a deprecated public member variable 
  is used.
386
  - numFAP and numSCV in Box(CC)FVElementGeometry have been renamed to 
387
388
    numFap and numScv, respectively.

389
390
391
392
393
394
395
* Deprecated MEMBER FUNCTIONS, to be removed after 2.3:
  - boundaryMatrixHeatFlux, markVertexRed and relativeErrorVertex 
    from ImplicitSpatialParams, ImplicitAssembler and ImplicitModel, 
    respectively. In favor of using 
    thermalConductivitySolid (see above), markDofRed and relativeErrorDof, 
    respectively. 

396
397
398
* DELETED classes/files, property names, constants/enums, 
  member functions, which have been deprecated in DuMuX 2.2:
  Everything listed as deprecated below has been removed.
Christoph Grueninger's avatar
Christoph Grueninger committed
399
400


401
402
403
Differences Between DuMuX 2.1 and DuMuX 2.2
===================================================

404
* IMPROVEMENTS and ENHANCEMENTS: 
405
406
407
408
409
410
411
412
  - Two new fully implicit models dedicated to simulate compositional
    (non-isothermal) CO2-brine systems have been added, together with 
    corresponding components and a fluid system. See test/boxmodels/co2(ni) 
    for details. These tests also illustrate the usage of element and vertex 
    parameters as well as boundary ids provided by DGF files for setting 
    permeability and porosity as well as boundary conditions.

  - Decoupled Models: An h-adaptive model using an MPFA L-method was added
413
414
    that simulates 2p and 2p2c flow on unstructured grids with hanging nodes 
    in two dimensions. See test/decoupled/2p(2c) for details.
415

416
417
418
419
420
  - All fully implicit porous media models are now capable of employing 
    the Forchheimer equation as an alternative to the commonly used 
    Darcy law. See test_forchheimer*p in test/boxmodels/mpnc for details. 

  - The Stokes models are now able to simulate the full Navier-Stokes 
421
422
    equations for momentum transport. See test/freeflow/navierstokes 
    for details.
423

424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
  - The fully implicit models have been (partially) generalized to allow 
    for a cell-centered discretization in addition to the default 
    vertex-centered (box) one. Cell-centered fully implicit 2p and 2p2c 
    models are already available in the developers part of Dumux. Further 
    generalizations and the inclusion in the stable part are planned for 
    Dumux 2.3.

  - Several model-specific features and classes have been unified, like 
    the calculation of the Darcy velocity for the fully implicit flux 
    variables, or the temperature, gravity, and spatial parameter 
    functionalities of the fully implicit problems. Moreover, many
    names have been made more consistent. This includes the naming 
    and grouping of several parameters and corresponding properties, 
    the indexing of phases and components, and the preference of the 
    partial name "params" over "parameters." For details, see also the 
    deprecations listed below.
440

441
  - Added compiler support for GCC 4.7 and Clang 3.1.
442

Christoph Grueninger's avatar
Christoph Grueninger committed
443
444
445
446
* IMMEDIATE INTERFACE CHANGES not allowing a deprecation period:
  - From Dune 2.2 on, FieldVector::size is a method rather than an enum value.
    It is mandatory to add the flag --enable-fieldvector-size-is-method to the
    CONFIGURE_FLAGS. An example is given in the opts file dumux/debug.opts.
447
448
449
  - Implicit models: TwoPIndices, TwoPNIIndices, and RichardsIndices 
    additionally get TypeTag as template parameter. If the Indices are not 
    obtained via the property, this has to be adapted.
450
451
452
453
454
455
456
457

  - Implicit models: All model-specific computeFlux functions in 
    ...localresidual.hh have to get an additional bool parameter onBoundary, 
    which is by default set to false. If outflow conditions should 
    be properly implemented, also the constructor of the flux variables in 
    ...fluxvariables.hh has to get the additional argument and the 
    class has to be adapted to deal with boundary faces. See FS#117 and #99
    for details.
458
    
459
* Deprecated CLASSES/FILES, to be removed after 2.2:
460
461
462
463
  - Model specific base box problems: The common functionality has been 
    collected in PorousMediaBoxProblem in 
    dumux/boxmodels/common/porousmediaboxproblem.hh. The problem can be derived 
    from PorousMediaBoxProblem, instead of the model specific base problem: 
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
    OnePBoxProblem, dumux/boxmodels/1p/1pproblem.hh,
    OnePTwoCBoxProblem, dumux/boxmodels/1p2c/1p2cproblem.hh,
    TwoPProblem, dumux/boxmodels/2p/2pproblem.hh,
    TwoPNIProblem, dumux/boxmodels/2pni/2pniproblem.hh,
    TwoPTwoCProblem, dumux/boxmodels/2p2c/2p2cproblem.hh,
    TwoPTwoCNIProblem, dumux/boxmodels/2p2cni/2p2cniproblem.hh,
    ThreePThreeCProblem, dumux/boxmodels/3p3c/3p3cproblem.hh,
    ThreePThreeCNIProblem, dumux/boxmodels/3p3cni/3p3cniproblem.hh,
    MPNCProblem, dumux/boxmodels/mpnc/mpncproblem.hh.
    
  - All "...SpatialParameters" base classes have been replaced by 
    "...SpatialParams" classes:
    BoxSpatialParameters, dumux/material/spatialparameters/boxspatialparameters.hh,
    BoxSpatialParametersOneP, dumux/material/spatialparameters/boxspatialparameters1p.hh,
    FVSpatialParameters, dumux/material/spatialparameters/fvspatialparameters.hh,
    FVSpatialParametersOneP, dumux/material/spatialparameters/fvspatialparameters1p.hh.
480
481
482
483
484
485
486
487
488
489
490

  - Due to the unification of flux variables for the fully implicit models, 
    some model-specific flux variables have become obsolete: 
    OnePFluxVariables, dumux/boxmodels/1p/1pfluxvariables.hh,
    TwoPFluxVariables, dumux/boxmodels/2p/2pfluxvariables.hh,
    RichardsFluxVariables, dumux/boxmodels/richards/richardsfluxvariables.hh.

  - Two components have new names and locations in dumux/material/components: 
    SimpleDNAPL, simplednapl.hh -> DNAPL, napl.hh
    Oil, oil.hh -> LNAPL, lnapl.hh

491
492
  - Some MPFA-O method files/classes have been moved to a new subdirectory 
    "omethod" in dumux/decoupled/2p/diffusion/fvmpfa: 
493
494
    fvmpfaopressure2p.hh, fvmpfaovelocity2p.hh, fvmpfaopressureproperties2p.hh

495
496
  - DUMUX_UNUSED is deprecated and will be removed after 2.2. It should be 
    replaced by the upstream version DUNE_UNUSED.
497
  
498
499
  - DUMUX_DEPRECATED_MSG is deprecated and will be removed after 2.2. It should
    be replaced by the upstream version DUNE_DEPRECATED_MSG.
500

501
502
* Deprecated PROPERTY NAMES, to be removed after 2.2: BEWARE: The compiler will
  not print any warning if a deprecated property name is used. 
503
504
505
506
  - The "SpatialParameters" property has been renamed to "SpatialParams".
  
  - The model specific "...Indices" property has been renamed to "Indices".

507
508
509
510
511
512
513
* Deprecated CONSTANTS/ENUMS, to be removed after 2.2: BEWARE: The compiler will
  not print any warning if a deprecated constant/enum is used.
  - In the 2p2c/ni and 3p3c/ni models, all indices related to phase and 
    components can be pre/suffixed with "w", "n" and, 
    for three phases, with "g". 
    boxmodels/2p2c/...: "l", "g" pre/suffixes have been replaced by "w", "n".
    boxmodels/3p3c/...: "c", "a" pre/suffixes have been replaced by "n", "g".
514
515

* Deprecated MEMBER FUNCTIONS, to be removed after 2.2:
516
517
  - Spatial parameters: The spatialParameters member functions of the base 
    problems have been replaced by spatialParams: 
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
    dumux/boxmodels/common/porousmediaboxproblem.hh, 
    dumux/decoupled/1p/diffusion/diffusionproblem...hh,
    dumux/decoupled/2p/impes/impesproblem2p.hh,
    dumux/decoupled/2p/transport/transportproblem2p.hh.
  
  - Flux variables: Renaming of members 
    "...AtIP" -> "...", 
    "concentration..." -> "massFraction...",
    "molarConc..." -> "moleFraction..."
    The "massFraction..." members have been deprecated, instead 
    "moleFraction..." should be used.
    Affected files:
    dumux/boxmodels/1p2c/1p2cfluxvariables.hh, 
    dumux/boxmodels/2p2c/2p2cfluxvariables.hh,
    dumux/boxmodels/mpnc/.../...fluxvariables.hh,
    dumux/freeflow/stokes.../stokes...fluxvariables.hh.

535
536
537
  - Box models: The primaryVarWeight() functions are no longer used for the 
    evaluation of the relative error. 

538
  - Element and FVElementGeometry: The elem_() and fvElemGeom_() member function
539
540
    of BoxLocalResidual have been replaced by element_() and fvGeometry_(). 
    
541
542
  - Primary variables: All "...primaryVar/s" member functions have been replaced
    by "...priVar/s": 
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
    dumux/boxmodels/common/boxlocalresidual.hh, 
    dumux/boxmodels/common/boxvolumevariables.hh.

  - Start functionality in dumux/common/start.hh: printUsageDGF and 
    printUsageGrid are no longer needed.
  
* DELETED member functions, which have been deprecated in DuMuX 2.1: 
  - dumux/material/spatialparameters/boxspatialparameters1p.hh:
    extrusionFactorScv and extrusionFactorScvf, now part of the volume variables

  - dumux/material/idealgas.hh:
    concentration, replaced by molarDensity

  - dumux/material/fluidmatrixinteractions/2p/efftoabslaw.hh:
    pC(const Params &params, Scalar Sw, const Scalar temperature)

  - dumux/common/start.hh:
    startFromDGF, startWithGrid, startWithParameters, all replaced by start

  - dumux/common/spline.hh:
    set(const ScalarArray&, const ScalarArray&, Scalar, Scalar), replaced by setXYArrays,
    set(const PointArray&, Scalar, Scalar), replaced by setArrayOfPoints

  - dumux/common/variablelengthspline_.hh, dumux/common/fixedlengthspline_.hh:
    various set routines, replaced by more descriptive names

  - dumux/io/vtkmultiwriter.hh:
    VtkMultiWriter(const std::string&, std::string), replaced by VtkMultiWriter(const GridView&, ...),
    beginTimeStep, replaced by beginWrite,
    createField, replaced by allocateManagedBuffer,
    addVertexData, replaced by attachVertexData,
    addCellData, replaced by attachCellData,
    endTimeStep, replaced by endWrite

  - dumux/decoupled/2p2c/2p2cproblem.hh:
    IMPETProblem2P2C(const GridView&, bool) replaced by IMPETProblem2P2C(TimeManager&, ...),
    IMPETProblem2P2C(..., SpatialParameters&, ...) replaced by IMPETProblem2P2C(TimeManager&, ...),
    initSat(const GlobalPosition&, const Element&) replaced by initSat(const Element&)
    initConcentration(const GlobalPosition&, const Element&) replaced by initConcentration(const Element&)
582
583
    
  - DUMUX_DEPRECATED has been removed.
584
585


586
Notable Differences Between DuMuX 2.0 and DuMuX 2.1
587
===================================================
588

589
590
- The thermodynamics framework has been overhauled:
  - The programming interfaces for fluid systems, fluid states and
591
    components has been formalized and cleaned up.
Klaus Mosthaf's avatar
Klaus Mosthaf committed
592
  - Fluid systems now have the option to cache computationally
593
    expensive parameters if they are needed for several relations.
594
  - Fluid systems are not charged with the computation of the
595
596
    chemical equilibrium anymore.
  - Fluid states are now centralized infrastructure instead of being
597
598
599
600
601
602
603
604
605
606
607
    model-specific.
  - Constraint solvers (which simplify solving thermodynamic
    constraints) have been introduced.
- Outflow boundary conditions have been implemented for the
  fully-implicit models 1p2c, 2p2c(ni) and stokes(2cni).
- The problem and spatial parameter base classes also provide optional
  model-independent interfaces. These methods only get the position in
  global coordinates as argument and are named *AtPos()
  (e.g. boundaryTypesAtPos()). This allows an easy transfer of problem
  definitions between implicit and sequential models.
- The following fully-implicit models have been added:
608
  - 3p3c, 3p3cni: Isothermal and non-isothermal three-phase,
609
610
    three-component models for flow and transport in porous media
    based on primary variable switching.
611
  - MpNc: A model for arbitrary number of phases M > 0, and components
612
613
614
    (N >= M - 1 >= 1) for flow and transport in porous media. This
    model also comes with an energy and a molecular diffusion module.
  - stokes, stokes2c, stokes2cni: Models for the plain Stokes
615
616
    equation as well as isothermal and non-isothermal Stokes models
    for two-component fluids.
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
- The sequentially-coupled models have been overhauled:
  - A common structure for cell centered standard finite volume
    implementations has been introduced.
  - The data structures where overhauled to avoid large clumps of data
    in large-scale simulations: Each cell stores data in its own
    storage object.
  - The too large assemble() methods have been split into submethods
    getStorage(), getFlux() etc. By this, inheritance of classes has
    been improved and code duplication was reduced.
  - The conceptual seperation of the "VariableClass" (central
    infrastructure), data storage, transport model and pressure model
    has been improved.
  - More of infrastructure is now shared with the implicit models
    (e.g. the BoundaryTypes). This results in significant performance
    improvements and makes debugging easier.
- The 2padaptive sequentially coupled model has been added. This model
  implements a grid-adaptive finite volume scheme for immiscible
  two-phase flow in porous media on non-conforming quadrilateral
  grids.
636
637
- The dependencies for the external dune-pdelab and boost packages
  have been removed.
638
639
640
641
642
643
644
645
- The build system has received major improvements:
  - There is now much better test coverage of build-time dependencies
    on packages for the default autotools-based build system.
  - Experimental support for building DuMuX using CMake has been much
    improved. In the long run, CMake is projected to become the
    default build system.
- All headers can now be included without any preconditions.
- DuMuX now compiles without warnings if the -pedantic flag used for GCC.
646
647
- Specifying run-time parameters is now possible. The mechanism allows
  to use parameter files or to specify parameters directly on the
648
649
650
651
652
653
  command line and fallback parameter input files have been added for
  each test application.  As a consequence, applications can be run
  now without specifying any command line arguments.
- The DuMuX property system has been fine-tuned:
  - Encapsulating property names with the PTAG() is no longer required
    for the GET_PROP* macros (but is still allowed).
654
  - Setting property defaults has been deprecated.
655
656
657
658
659
660
661
  - All properties defined for a type tag can now be printed. Also,
    their value and the location in the source where they where
    specified is included in the output.
- Using quadruple precision math has been made possible for GCC 4.6 or newer:
  - To use it, the configure option '--enable-quad' needs to be added
    and the type of scalar values needs to be changed to 'quad'. This
    can be done in the problem file using
662

663
        SET_TYPE_PROP(YourProblemTypeTag, Scalar, quad);
664

665
666
    It should be noted, that performance is very poor when using
    quadruple precision arithmetic. This feature is primarily meant as
667
668
    a debugging tool to quickly check whether there are machine
    precision related convergence problems.