made small corrections with the tutorial figures

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@4592 2fb0f335-1f38-0410-981e-8018bf24f1b0

doc/handbook/tutorial-coupled.tex

@@ -374,11 +374,12 @@ compile the program.
 \begin{figure}[h]
 \psfrag{K1}{K $= 10^{-7}\text{ m}^2$}
 \psfrag{phi1}{$\phi = 0.2$}
-\psfrag{Lin}{Linear Law}
+\psfrag{Lin}{Brooks-Corey Law}
+\psfrag{Lin2}{$\lambda = 1.8$, $p_b = 10000$}
 \psfrag{K2}{K $= 10^{-9}\text{ m}^2$}
 \psfrag{phi2}{$\phi = 0.15$}
-\psfrag{BC1}{Brooks Corey Law} 
-\psfrag{BC2}{$\lambda = 1.8$, $p_b = 0.0$}
+\psfrag{BC1}{Brooks-Corey Law} 
+\psfrag{BC2}{$\lambda = 2$, $p_b = 15000$}
 \psfrag{H1y}{50 m}
 \psfrag{H2y}{15 m}
 \psfrag{H3y}{20 m}

doc/handbook/tutorial-decoupled.tex

@@ -256,9 +256,9 @@ type tag.
 
 After this, change the \texttt{create()} method of the \texttt{Grid}
 property so that it matches the domain described
-by figure \ref{tutorial-coupled:ex2_Domain}. Adapt the problem class
+by figure \ref{tutorial-decoupled:ex2_Domain}. Adapt the problem class
 so that the boundary conditions are consistent with figure
-\ref{tutorial-coupled:ex2_BC}. Initially the domain is fully saturated
+\ref{tutorial-decoupled:ex2_BC}. Initially the domain is fully saturated
 with water and the pressure is $p_w = 5 \times 10^5 \text{Pa}$ . Oil
 infiltrates from the left side. Create a grid with $20$ cells in
 $x$-direction and $10$ cells in $y$-direction. The simulation time
@@ -286,7 +286,7 @@ compile the program.
 \psfrag{L3x}{25 m}
 \centering
 \includegraphics[width=0.8\linewidth,keepaspectratio]{EPS/Ex2_Domain.eps}
-\caption{Set-up of the model domain and the soil parameters}\label{tutorial-coupled:ex2_Domain}
+\caption{Set-up of the model domain and the soil parameters}\label{tutorial-decoupled:ex2_Domain}
 \end{figure}
 
 \begin{figure}[h]
@@ -297,7 +297,7 @@ compile the program.
 \psfrag{no flow}{no flow}
 \centering
 \includegraphics[width=0.8\linewidth,keepaspectratio]{EPS/Ex2_Boundary.eps}
-\caption{Boundary Conditions}\label{tutorial-coupled:ex2_BC}
+\caption{Boundary Conditions}\label{tutorial-decoupled:ex2_BC}
 \end{figure}
 
 \begin{itemize}