Synchronizing the boundary condition evaluation points makes the
test pass. Keep the setting on the master, update the reference
solution, simplify the Neumann boundary condition.

Manually picked from 8aae0b9f.

Beatrix Becker authored 7 years ago and Timo Koch committed 7 years ago

first results: box-ni and cc-ni compile, cc does not converge, box needs changes in vtk output to parse

this means
* the first vtk (normally the initial solution) is *-00000.vtu
* if all timesteps are writen the time step number and vtk number correspond

Move all testing related scripts to subfolder testing

* Test now reaches the inhomogeneities.
* Introduced epsiodes to reduce vtu output
* Increase end time

All tests for 3p and 3p3c now include the new material law classes.
Since some errors where fixed there, the old reference solutions were
replaced with newly generated ones in order to make all tests pass.

See FS#250 for details.

* fixed the kuevette test case, wrong grid was used
* small changes in the problem description for all 3p3c tests

reviewed by bernd



git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@15540 2fb0f335-1f38-0410-981e-8018bf24f1b0

- changed naming of mole fractions x^alpha_kappa to x^kappa_alpha
- added zeroThreshold for the kuevette problem, because the non-wetting
  phase already disappaered at the end of the simulation

reviewed by timok



git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@15436 2fb0f335-1f38-0410-981e-8018bf24f1b0

- All headers and source files are moved to the specfied include directory during installation.

- Existing CMakeLists.txt files were appended.
- CMakeLists.txt were added in folders that did not contain any CMakeLists.txt files but contain headers
- The installed version of dumux has been tested by Bernd with the dumux-lecture module

Reviewed, modified and tested by Bernd.



git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@15347 2fb0f335-1f38-0410-981e-8018bf24f1b0

added cmake macro which, when called, links all input files of a folder

reviewed by martinb


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@15155 2fb0f335-1f38-0410-981e-8018bf24f1b0

Adapt all Ctests to the new, architecture.

Reviewd by fetzer


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@15129 2fb0f335-1f38-0410-981e-8018bf24f1b0

Dune 2.4 and Dune 2.3 differ in the number of time steps.
(reviewed by becker)


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@14533 2fb0f335-1f38-0410-981e-8018bf24f1b0

The number of time steps seems to have reduced. The reference
solution is still matching.
(reviewed and approved by becker)


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@14496 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@14457 2fb0f335-1f38-0410-981e-8018bf24f1b0

update to the generic non-isothermal model

adjusted:
 - 1p model
 - 3p model
 - 1p test (including 1pni tests)
 - 1p2c test (including 1p2cni tests)
 - 2p2c test (including 2p2cni tests)
 - 3p test (including 3pni tests)
 - 3p3c test (including 3p3cpni tests)
 - new ctest for kuevette problem

updated:
 - SET_TYPE_PROP instead of SET_PROP
 - documentation of non-isothermal problems
 - solution for 2pinjectionproblem (now with simplex grid)
 - version number in one start message

deleted:
 - old non-isothermal test folders
 - whitespace at end of configure.ac lines

created and reviewed by kissinger and fetzer




git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@13825 2fb0f335-1f38-0410-981e-8018bf24f1b0

They should be inside the *.input files.
Most parameters were redunant anyway.
(reviewed by fetzer)


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@13360 2fb0f335-1f38-0410-981e-8018bf24f1b0

Tests are still built only for ctest calls, not for plain make.
Tests are built for make if -DDUMUX_BUILD_ALL_TESTS:BOOL=TRUE is set.
This change is needed for CDash, otherwise compile errors and warnings
where not displayed.

(reviewed by bernd)


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11537 2fb0f335-1f38-0410-981e-8018bf24f1b0

test.
(reviewed by bernd)


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10778 2fb0f335-1f38-0410-981e-8018bf24f1b0

The tests which were added in the CMakeLists.txt in the root dir are now added
in the test directories. All arguments were transfered.

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10752 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10751 2fb0f335-1f38-0410-981e-8018bf24f1b0

implicit branch: start adapting CMake/CTest. Use the correct names for the box tests. Move reference solutions to a separate directory. Build cell centered tests (do not actually test them yet).

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/branches/implicit@9793 2fb0f335-1f38-0410-981e-8018bf24f1b0

implicit branch: change directory structure. Add dumux/implicit directory. Copy models from boxmodels/model to implicit/model. Copy boxmodels/common to implicit/box. Copy ccmodels/common (from devel) to implicit/cellcentered. Copy boxmodels/common/box*.hh to implicit/common/implicit*.hh. Move test/boxmodels to test/implicit. Adapt configure.ac and Makefile.ams. Everything still builds.

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/branches/implicit@9679 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@7612 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@4535 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@3832 2fb0f335-1f38-0410-981e-8018bf24f1b0