writer: call that function in order to write it to result file
reference: identical except one additional variable present


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@13234 2fb0f335-1f38-0410-981e-8018bf24f1b0

in output


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@13223 2fb0f335-1f38-0410-981e-8018bf24f1b0

included the energy fluxes transported by the diffusive component fluxes
times the enthalpy of the components
applies only for the free flow region

reviewed by Bernd and Vishal


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@13165 2fb0f335-1f38-0410-981e-8018bf24f1b0

Local chemical equilibrium and local thermal non-equilibrium with two energy equations. 

A new fluidsystem with constant properties is implemented. 

The fluid temperature on the right boundary is verified by an analytical approximation for the stationary configuration.

reviewed by Christoph

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12743 2fb0f335-1f38-0410-981e-8018bf24f1b0

Fixed the stokes2cni test-problem such that it works with molar and mass fractions. The results match with those from klaus (see reference file r10276). 

(reviewed by Katherina and Christoph)

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12698 2fb0f335-1f38-0410-981e-8018bf24f1b0

to. 

ALU has a different convergence behavior than UG, leading to different
timestep sizes. UG and ALU have the same (fuzzy) result if the timestep
is limited to one second. 

Therefore, an update of the reference solution, indirectly caused by the
change of grid managers, seems justified. 
Discussed with Bernd and Christoph


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12654 2fb0f335-1f38-0410-981e-8018bf24f1b0

(reviewed by thomas)

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12647 2fb0f335-1f38-0410-981e-8018bf24f1b0

This reference solution should fit the conducted test. 
It was good, if all tests used the parameter from the input file. ...


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12592 2fb0f335-1f38-0410-981e-8018bf24f1b0

This shoudl revert the reference solution of the 3p model and update the
reference solution of the 3p3c model


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12589 2fb0f335-1f38-0410-981e-8018bf24f1b0

the reference solutions were not valid any more after commit 12215:
removal of incremental update of average molar mass ind fluidstate. 
It is unclear why this led to changing reference solutions, but no
substantial difference in results, also after longer simulation runs,
could be observed. 



git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12584 2fb0f335-1f38-0410-981e-8018bf24f1b0

We agreed that the new consideration of partial pressures makes more
sense, therefore the reference is updated. 


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12583 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12558 2fb0f335-1f38-0410-981e-8018bf24f1b0

Update reference solutions to accomondate for the changes of the pressure increment for the fluid compressibility in commit r12400. Only minor differences in the solution.

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12465 2fb0f335-1f38-0410-981e-8018bf24f1b0

Adapt the 2d-adaptive tests to r12460 to use new class names. Changed name of the test application, problem, reference file etc. to prepare for the upcoming 3d test.
Reviewd by GrüniBüni

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12464 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12415 2fb0f335-1f38-0410-981e-8018bf24f1b0

- longer simulation time: with coarser grid and forward instead of central
  differences 


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12228 2fb0f335-1f38-0410-981e-8018bf24f1b0

the new stokes2c problem now uses the stokesnc model since stokes2c is deprecated/obsolete. new reference test file was necessary due to more output data of stokesnc and small numerical differences in the order of 10^-8 for some entries.

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@12095 2fb0f335-1f38-0410-981e-8018bf24f1b0

Small changes in problem setup of the implicit 2p2c test: A gas phase with nitrogen and water vapor is injected (instead of solely the component nitrogen) which is composed according to the prevailing conditions in the aquifer. This is realized with the solution-dependent Neumann boundary condition. Exchanged reference solutions for cc and box, which showed tiny differences. Improved docu.

Discussed with Philipp and Bernd, reviewed by Markus

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11993 2fb0f335-1f38-0410-981e-8018bf24f1b0

Using a mutable permeability tensor in the spatial parameters resulted
in wrong averaged permeabilities. Store permeabilities in a vector
instead, just like in test_diffusion.


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11784 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11558 2fb0f335-1f38-0410-981e-8018bf24f1b0

Updated references after implementation of the ability to use either mass or mole fractions and change of default settings.

reviewed by kathinka

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11556 2fb0f335-1f38-0410-981e-8018bf24f1b0

test_impeswithamg: run the parallel test a bit longer such that something happens on the second process. Adapt reference solution.

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11532 2fb0f335-1f38-0410-981e-8018bf24f1b0

setting of the inflow velocities (and related pressure variations)


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11497 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11488 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11439 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11337 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11335 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11334 2fb0f335-1f38-0410-981e-8018bf24f1b0

the pressures, also some negligible differences in the results.


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11193 2fb0f335-1f38-0410-981e-8018bf24f1b0

   - changes due to slightly different time steps



git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@11164 2fb0f335-1f38-0410-981e-8018bf24f1b0

The inflow velocity is varied sinusoidally. Updated reference solution.


git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10858 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10740 2fb0f335-1f38-0410-981e-8018bf24f1b0

update reference solutions that changed due to different Dirichlet handling and/or different format of the velocity output

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10734 2fb0f335-1f38-0410-981e-8018bf24f1b0

Error in brine density calculation according to Batzle and Wang in brine.hh. Exchanged + with - in the formula. This change is significant for brines with a high temperature and a high salinity.
Accordingly the reference results for co2 (box and cc) and co2ni (box and cc) are updated, although changes are very small.
Reviewed by Lena.

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10726 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10708 2fb0f335-1f38-0410-981e-8018bf24f1b0

test_cc2p2cni: adapt reference solution due to improved Dirichlet boundary handling for full-implicit cell-centered models

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10696 2fb0f335-1f38-0410-981e-8018bf24f1b0

test_cc1p: adapt reference solution due to improved Dirichlet boundary handling for full-implicit cell-centered models

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10694 2fb0f335-1f38-0410-981e-8018bf24f1b0

test_cc2p: adapt reference solution due to improved Dirichlet boundary handling for full-implicit cell-centered models

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10692 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10389 2fb0f335-1f38-0410-981e-8018bf24f1b0

git-svn-id: svn://svn.iws.uni-stuttgart.de/DUMUX/dumux/trunk@10340 2fb0f335-1f38-0410-981e-8018bf24f1b0